Introduction
Injection Moulding Machine is special machinery for producing pet snacks. With such machine, various shapes can be made, such as hedgehog, crocodile, dog, bone, pork ears, barrel, etc. The shapes are very lovely and it is a ideal encouragement to dogs and cats while they learn a new action or do well in some exercises and games. Also, we can provide different recipes to meet various market demands.
Certificate
CE CERTIFICATE provided, which strictly meet CE standards and EU countries import policy.
ISO 9001 CERTIFICATE provided, which strictly meet ISO 9001 standards.
Features
It has the following features:
- Pet Treats Injection Moulding Machine comes with user-friendly microprocessor controller with these following features.
- Equipped with servo motor to realize higher efficiency and lower consumption.
- Dust, oil proof and colorful touch switch control panel.
- El display of pressure, speed, time and distance for each motion.
- Shut-down device with 100 presets mold data memory.
- Equipped with 4 stages injection, 3 stages holding pressure and 3 stages back pressure.
- PID barrel temperature control: temperature abnormal & electrical wire disconnection alarm.
- SSR-solid state temperature controller.
- Screw cold start protection.
- Abnormal shot detection.
- Output quantity and packaging quantity preset.
- Clamping, injection and ejection (option), and carriage action (option) by linear potentiometer.
- Screw rotating speed read-out.
- Security code function to avoid missing data or careless changing.
- Super low pressure clamping ensures security of user, and maintains lifespan of machine efficiently.
Molding machine is for different shapes of products like list above. Changing the moulds, then it can produce different shape. So, the final products can be many shapes. Servo motor, energy saving up to 50%, low noise, oil temperature no more than 35 degree.
Technical Parameters
| Model | SR-268 |
| Clamping force | 5680KN |
| Installed power | 89kw |
| Max mold size | 800*800 |
| Shot weight | 2500g |
| Dimension | 8.9*2.3*2.8m |
| Oil tank capacity | 1000L |
Commissioning & After-sales Service
1. We make accurate factory layout design according to customer’s factory size; if the customer needed, we could make workshop design with electricity power, water supply, gas power, material storage, final storages, worker’s restroom, etc.
2. After delivering machines to client’s factory, we start to apply for the Visa to client’s country immediately; normally the vessel needs 20-60 days to the required port, so we have enough time to get the Visa. While the machines arrives your factory, our engineers are ready to start for the commissioning service.
3. 1-2 of our engineers will go to your factory to install and adjust the processing line to realize normal production at shortest time.
4. Our engineers have responsibility to train and teach the workers how to operate, clean, maintain and repair all the machines, until the workers could well operate the processing line.
5. It normally costs 10 days for the commissioning service, and we supply 1 year guarantee from the date of completion of commissioning service.
6. The engineer’s round-trip flight tickets, accommodation and daily salary USD 100 are on client’s account.
| Item | Name of item | Unit | DM-268 |
| Injection Unit | Screw Diameter | mm | 55 |
| Screw L/D Ratio | Ratio | 20 |
| Injection Volume (Theoretical) | cm | 601 |
| Injection Weight (PS) | g | 548 |
| Injection Pressure | Mpa | 185.1 |
| Injection Rate into Air | g/s | 223.7/276.1 |
| Injection Stroke | mm | 256 |
| Injection Speed | Mm/s | 95/116 |
| Screw Speed | rpm | 201/246 |
| Clamping Unit | Clamping Force | KN | 2600 |
| Clamping Stroke | mm | 550 |
| Space Between Tie-bars | mm×mm | 580 x 580 |
| Max. Mould Height | mm | 600 |
| Min. Mould Height | mm | 250 |
| Ejector Stroke | mm | 160 |
| Hydraulic Ejection | KN | 68 |
| Ejector Rob Quantity | pcs | 9 |
| Others | Max. Pump Pressure | Mpa | 17.5 |
| Pump Motor Power | kw | 22/30 |
| Heater Power | kw | 15.9 |
| Hopper Volume | L | 50 |
| Oil Pump Volume | L | 550 |
| Machine Weight | t | 8.5 |
| Mould Positioning Ring Diam | mm | 160 |
| Sphere Radius | mm | SR10 |
| Machine Dimension | m x m x m | 5.82 x 2 x 2 |
Our exhibitions:
Every year we will attend many international exhibitions to do customer visit and maintence, with us your business will be safe,your money will be safe.
A. Finished time
The production line will be finished in 25-40 days after confirmation.
B. Payment Term
30% is paid by T/T as the down payment, 70% is paid by T/T or L/C before shipment.
C. Delivery Time
When the machines are finished, we will invite you to our factory for testing machine.
then we will arrange the worker to load container promptly after all corresponding inspection issues finished.
Video:
Smart plant:
Working video:
More details and price ,please contact us :
